Average Reviews:
(More customer reviews)This is a great product for a hard clear finish. Before I started my project, I put both bottles in a container of hot water(not boiling). This warmed the product. It poured very easy and with less bubbles. Also, I put a small heater in the room to warm the room up. The warming of the room and warming up the bottles helped the harding of the product in less time. I did find that blowing through a straw (5-10 after pouring) did make the bubbles disappear. I faux finished my kitchen counter top and it is beautiful. Currently, I am faux finishing a corner table in my hallway. Then, I will us the Envirotex Lite for a clear hard finish.
Click Here to see more reviews about: Environmental Tech EnviroTex Pour-On High Gloss Finish quart kit
EnviroTex Lite is a pour-on plastic finish that preserves and beautifies. It cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 48 hours. This durable, resilient material requires no polishing to produce a high gloss.One coat is all that is usually required for a deep attractive finish. However, two or more coats may be applied one over the other by simply wiping the surface with alcohol and a clean cloth prior to recoating.EnviroTex Lite can be used on photos, ink, plaster, paint, wood, and table tops. One coat equals up to 50 coats of varnish.Coverage areas may vary according to the surface and method of application. It is recommended that too much be mixed for a project rather than not enough.8 oz. Kit can cover 2 square feet.The Pint Kit can cover 4 square feet.The Quart Kit can cover 8 square feet.The Half Gallon Kit can cover 16 square feet.The Gallon Kit can cover 32 square feet.
Get 38% OFF
0 comments:
Post a Comment